Cadiveu Plástica Dos Fios Thermal Sealing Kit 60 ml
Regular price
R$ 247,50
Cadiveu Plastica dos Fios Thermal Sealing is an intensive treatment that reduces volume, eliminates frizz and provides smooth, controlled strands for up to 3 months. It deeply nourishes and hydrates the hair, as well as providing incredible shine and strengthening the structure, preventing breakage.
Action
Treatment consisting of Arginine, Açaí Extract and Acetic Acid (acidic pH). Açaí Extract: rich in nutrients such as Vitamins, Essential Sugars and Emollient Oils. Its antioxidant and protective action promotes complete regeneration of hair, hydrating it efficiently and for a long time. Amino acids: balance the structure of hair from aggression caused by excessive use of dryers and straighteners. Increases its manageability and elasticity, leaving hair softer and extremely easy to comb. Phytonutrients: Nourish and protect hair, helping to regenerate damaged and worn parts. Shampoo with Acetic Acid: as it has an acidic pH, it can cause irritation and peeling on sensitized leather. For this reason we recommend not using it on pregnant women, people with sensitive skin and children up to 12 years old.
How to use
Required material: silicone gloves, dryer, straightener, plastic clips, fine comb, brush and plastic container.
Wash your hair with the Pre-Treatment Shampoo, massaging until foam forms. Wash twice for virgin, very resistant or very dirty hair. Leave to act for 5 minutes and rinse completely. Attention: do not rub the scalp.
Dry your hair 80% with a hairdryer and your fingers.
Separate the hair into 6 parts (a vertical line separating the hair into two sections - right and left - and 3 horizontal sections - nape, middle and front from the ears). Secure each section into a bun with a clip.
Pour 20 to 40ml of Thermal Sealing into a container and put on silicone gloves.
Start applying it to a strand on the back of the neck using the brush. Apply two fingers from the roots to the base of the strand and pull the product to the ends with the comb. Make sure the product is on all wires.
Repeat the procedure with the strand on the side. With the dryer on a cold setting, dry both strands to 100%. It is important to dry two strands at a time with a cold spray. This prevents the formation of smoke and prevents the product from evaporating without taking effect. Repeat the procedure 5 to 7 on the two central strands of hair, one at a time.
Finally, repeat procedure 5 to 7 on the two front strands of hair, drying the strands behind. It is important that neither the wind from the dryer nor the strand with the product comes into contact with the face.
Time to plank! For blonde, damaged or chemically treated hair, the straightener temperature should not exceed 200°C. For normal, virgin or resistant hair, the temperature should be 230°C.
Divide your hair again into sections using clips. Separate a thin, linear strand and flat iron the length (without the ends) of the strand 10 times (flat at 200°C) or 7 times (flat at 230°C).
Straighten the ends (without the length) of the hair up to 4 times (straighten at 200°C) or 2 times (straighten at 230°C). This way you avoid the artificial smooth effect on the ends.
Repeat this process (steps 11 and 12) for all sections of hair. The straight iron in relation to the leather leaves the hair straighter naturally from the roots.
After straightening all the strands, rinse your hair well.
Apply the Restorative Mask to the hair, gently massaging the strands. Let it act for 5 minutes and rinse again.
Dry your hair with a hairdryer.
On relaxed or straightened hair, apply Plastic Thermal Strand Sealing after the chemical process.
Treatment consisting of Arginine, Açaí Extract and Acetic Acid (acidic pH). Açaí Extract: rich in nutrients such as Vitamins, Essential Sugars and Emollient Oils. Its antioxidant and protective action promotes complete regeneration of hair, hydrating it efficiently and for a long time. Amino acids: balance the structure of hair from aggression caused by excessive use of dryers and straighteners. Increases its manageability and elasticity, leaving hair softer and extremely easy to comb. Phytonutrients: Nourish and protect hair, helping to regenerate damaged and worn parts. Shampoo with Acetic Acid: as it has an acidic pH, it can cause irritation and peeling on sensitized leather. For this reason we recommend not using it on pregnant women, people with sensitive skin and children up to 12 years old.
How to use
Required material: silicone gloves, dryer, straightener, plastic clips, fine comb, brush and plastic container.
Wash your hair with the Pre-Treatment Shampoo, massaging until foam forms. Wash twice for virgin, very resistant or very dirty hair. Leave to act for 5 minutes and rinse completely. Attention: do not rub the scalp.
Dry your hair 80% with a hairdryer and your fingers.
Separate the hair into 6 parts (a vertical line separating the hair into two sections - right and left - and 3 horizontal sections - nape, middle and front from the ears). Secure each section into a bun with a clip.
Pour 20 to 40ml of Thermal Sealing into a container and put on silicone gloves.
Start applying it to a strand on the back of the neck using the brush. Apply two fingers from the roots to the base of the strand and pull the product to the ends with the comb. Make sure the product is on all wires.
Repeat the procedure with the strand on the side. With the dryer on a cold setting, dry both strands to 100%. It is important to dry two strands at a time with a cold spray. This prevents the formation of smoke and prevents the product from evaporating without taking effect. Repeat the procedure 5 to 7 on the two central strands of hair, one at a time.
Finally, repeat procedure 5 to 7 on the two front strands of hair, drying the strands behind. It is important that neither the wind from the dryer nor the strand with the product comes into contact with the face.
Time to plank! For blonde, damaged or chemically treated hair, the straightener temperature should not exceed 200°C. For normal, virgin or resistant hair, the temperature should be 230°C.
Divide your hair again into sections using clips. Separate a thin, linear strand and flat iron the length (without the ends) of the strand 10 times (flat at 200°C) or 7 times (flat at 230°C).
Straighten the ends (without the length) of the hair up to 4 times (straighten at 200°C) or 2 times (straighten at 230°C). This way you avoid the artificial smooth effect on the ends.
Repeat this process (steps 11 and 12) for all sections of hair. The straight iron in relation to the leather leaves the hair straighter naturally from the roots.
After straightening all the strands, rinse your hair well.
Apply the Restorative Mask to the hair, gently massaging the strands. Let it act for 5 minutes and rinse again.
Dry your hair with a hairdryer.
On relaxed or straightened hair, apply Plastic Thermal Strand Sealing after the chemical process.
On dyed or toned hair, apply Plastic Thermal Sealing of the Hair two days before or after dyeing, to better fix the color pigments in the hair.
Result
Naturally straight hair, frizz-free, stronger, repaired and with incredible shine for up to 3 months!
Result
Naturally straight hair, frizz-free, stronger, repaired and with incredible shine for up to 3 months!
